PRICES EXCLUDE VAT — ADDED IN THE BASKET · SHIPPING ACROSS EUROPE

Guides & Education

Everything you need to make candles, wax melts and diffusers safely and legally, explained simply. The regulatory guides open with a short video.

Regulations and labelling

Guide 1 · with video

How to read our technical documents

Where to find each fragrance’s SDS, IFRA and allergen documents, which sheet to choose and what to copy onto your label.

Read the guide →

Guide 2 · with video

How to make and apply your candle label

CLP label and EN 15494 warnings, with two real examples: one label without a UFI and one with a UFI.

Read the guide →

Guide 3 · with video

How to notify your candle on the ECHA portal

PCN notification and UFI step by step, with ECHA’s official links.

Read the guide →

Choose and create

Quiz

Find your wax

Answer a few questions and find the best wax for your project.

Take the quiz →

Guide

Wax comparison guide

Soy, rapeseed, coconut, blends, paraffin and beeswax side by side: finish, scent throw, burn and melt point.

Read the guide →

Guide

How to choose the right wax

A comparison of our plant waxes, blends and beeswax.

Read the guide →

Guide

Baby Scents: soft fragrances

What “baby” fragrances are, what they are not, and how to use them responsibly.

Read the guide →

Wax differences at a glance

Summary

There is no “best” wax, only the right wax for your result

Each wax family trades off finish, scent throw and structure differently. Here is the short version.

  • Soy: the dependable all-rounder. Smooth finish, good glass adhesion, good scent retention and a slow burn. Container soy melts at roughly 45–54 °C (pillar soy at about 60 °C), and many container formulations include additives that reduce frosting. Some soy waxes can still show frosting, especially with dye.
  • Rapeseed and sunflower: very stable, white, with an even, smooth finish and European origin. Container grades melt at about 46–52 °C; the harder mould grades reach 57–65 °C. Sunflower gives very white candles with a soft flame and a long burn.
  • Coconut: creamy, organic look and strong scent throw. Its manufacturer, Cargill, also highlights even, clean burning and colours that stay true from white to bold shades. Pure coconut is very soft, melting at only about 31–38 °C, so it is mostly used in blends and massage candles rather than on its own in a container.
  • Coconut blends (with soy or rapeseed): the premium balance of creaminess and structure, with less frosting and a smoother finish. They melt at roughly 33–57 °C depending on the blend (Coco & Soja 33–51 °C, Elite 600 about 41 °C, Kerax 4135 about 50 °C, EcoCoco about 55 °C). Cure times vary: at least 12 hours for Elite 600, 48 hours for EcoCoco and 7–14 days for most other blends.
  • Technical blends (plant + mineral): maximum stability and consistency for professional production, with low frosting. Hywax 6213 melts at about 48 °C, and SoyaLuna, a soy blend with about 20% paraffin, at about 44–49 °C in containers and 52–57 °C in pillars and melts.
  • Paraffin: the benchmark for hot throw, so it needs less fragrance than vegetable waxes: about 6% in paraffin gives the hot throw of 8–9% in a vegetable wax. Soft grades (about 52–54 °C) suit containers and give a smooth, slightly glossy finish, while hard grades (60–62 °C and above) are used for pillars. Oil content and hardness matter as much as the melting point.
  • Beeswax: natural and firm, with a slow burn and a soft honey scent. It melts at about 62–65 °C, which makes wicking harder, so it is not the usual first choice for beginners.

Good to know: melt points come from manufacturers’ technical sheets and vary from product to product and batch to batch, so always check the sheet of the wax you use. The real result also depends on your wick, fragrance, fragrance load and container. Always test before you produce.

Compare every wax in detail →  ·  Take the quiz →

Technical articles

Have a question these guides don’t answer? Contact us.